"Believe" Shadow Box - Christmas Decor

The holidays are upon us!  I have had a shadowbox frame in my stash for a long time  I decided to take it out and turn it into some Christmas decor this year.  The project I came up with is very quick and easy and looks magical!  Read on to see just what I did.....

You will need:

Styletechcraft Vinyl:  Polished Metal, Red

Transfer paper

Weeding tool

Shadow box: 8" x 10"; (I painted mine black)

Sisal trees

Memory paper and embellishments

Glitter:  white

Glue

Paper trimmer

Die-cut machine

Directions:

1.  Take the shadow box apart.  Make sure the glass is clean.  Paint the frame if desired.

2.  Cut the memory paper to fit in the back of the shadowbox frame.  Adhere.

3.  Glue the sisal trees to the bottom of the shadow box.  Sprinkle generously with glitter.  Remove most of the excess, but leave some for effect. Adhere the wreath and small embellishments to the memory paper.

4.  Cut out the word Believe on the die-cut machine.  I set the size at 1" which is the height.  Apply the transfer paper and pick out the part of the design you won't be using.  This is called "weeding".

Adhere the sentiment to the inner frame as shown. Remove the transfer paper.

5.  Replace all of the layers of the frame.  Box, inner frame, glass and top frame.  Now it is ready to show off!

Thank you for taking time for the blog today.  I hope you are inspired to go forth and create your own special holiday decor!

Make sure to take the time to enjoy the small blessings along the way and

Live Life with a Flourish!

Marilyn

I receive complimentary product in exchange

for my creativity on this blog.

DIY Snow Globe with etchall(R)

Have you ever tried etching?  I have a project idea to share with you today.  I used a recycled jar, some craft mirrors, glue and glitter and created a DIY snow globe.  I used some small sisal trees but you can use any miniatures that you would like to put in your snow globe.  Read on to see how!

******Follow this link to watch a video of Barbee explaining how to use etchall(R)

Materials you will need:

etchall(R): 16 oz.  dip'n etch

etchall (R):etchmask

etchall (R) squeegee

tacky glue

white glitter

sisal trees (any other minis you want for your globe)

3" foam ball - halved

craft mirrors:  1/2" square, 2-1/2" round

trim:  1/2" silver

recycled plastic bottle or container with the top cut off.  (slightly larger than the jar)

scrap paper

scissors

adhesive vinyl:  red

die-cut machine:  cut the word "Believe"

marbles or rocks (for weighting the jar)

Directions:

1.  Make sure your recycled jar is clean and sparkling! Don't forget the lid!

2.  Use the die-cut machine to cut a 3" wide oval.  

3.  Adhere the oval to the jar.  Use the Squeegee(R) to smooth out any air bubbles.  Remove the transfer paper and discard.

Now you are ready to etch!

4.  Add some marbles or rocks to the jar to give it some weight.  Sit it in the recycled plastic container.  Carefully pour the etchall(R) dip'n etch into the container.  As you can see in the photo below, the liquid is very dark.  That is a natural process with this product that happens over time.  The product is still good!  Go ahead and use it and make sure to save it for another use after you have your etch!

5.  Set the timer for 15 minutes.  If you need to adjust the jar in the etching liquid you can leave it in longer.  When the time is up, remove the jar, remove the etchmask (discard), and wash thoroughly.  Return the dip'n etch liquid to it's original container for another use.

6.  Now comes the fun part!  Invert the jar and adhere a round craft mirror to the (now) top of the jar.  Adhere the smaller square mirrors around the sides as shown.  I used a jar that had little square indents around the top and bottom which worked great for placing the mirrors.  You could use large rhinestones for this step too.  Apply a line of glue around the un-etched oval on the jar.  Cover it with glitter.  Also apply glitter around the mirrors.  Careful not to get it too messy or your mirrors will slide off.

7.  Trim the foam to fit the inside of the lid allowing room for the jar to screw back on.  Adhere the foam to the lid.  Adhere the trees to the foam and sprinkle heavily with glitter.  Allow to dry.

8.  I used my die-cut machine to cut out "Believe" from a red vinyl adhesive sheet.  I used some transfer paper over the top of it and applied it to the jar as shown.  Once all the air bubbles are rubbed out; remove the transfer paper.

9.  Insert the trees into the jar; screw the lid in place.  Finish by adding some silver trim around the sides of the jar lid.  

10.  I showed a variation at the top of the page.  Let your imagination be your guide!  Using recycled jars of all sizes make great snow globes for decorations and gifts.

Make sure to take the time to enjoy the small blessings along the way and

Live Life with a Flourish!

Merry Christmas!

Marilyn

I received complimentary product for this

blog in exchange for my creativity,

Snowman Factory with Deflecto Stackable Caddy Organizer

December Greetings Friends!  As I write this blog, I am looking around at my stacks and piles of Christmas decorations as I finish up some projects and look forward to decorating the house.  Deflecto has come up with a Stackable Caddy storage system that is a favorite of everyone!  The caddys are made to Stack'N Go with a Caddy Wheel Base.  You can pile on as many as you desire for convenient storage.

I decided to dedicate one of my caddy's to a festive storage for the snowman ornaments I make for the holidays.  I put the foam balls, paints, paintbrushes and accessories in the storage bins for convenience when I work on this project. 

Read on, and I will tell you about how I decorated the caddy!

You will need:

Deflecto:  Stackable Caddy Organizer #29003CR

Paints:  Metallic Gold Acrylics    (Designer note:  Spray paint works great too)

Sponge:  I used a sea sponge

Paintbrushes

Vinyl with adhesive:  Metallic Gold and Clear Glitter

Die-cut machine

Water Bucket

Paper Plates

Paper Towels

Scissors

Paper Trimmer

Instructions:

1.  Remove all of the clear bins from the caddy.

2.  Pour out some paint on a paper plate.  Wet the sponge and squeeze out all of the moisture.  Use a pouncing motion to apply paint to the sponge and repeat that motion as you apply the paint to the caddy.  After applying a coat of paint to the caddy, apply a second coat where needed.  **  If you want a quicker way to do this......a metallic spray paint made for plastic will work great!

3.  The caddy should look about like this when you are finished painting.

4.  Stars:  Cut 1", 3/4" and 1/2" stars from the vinyl using the die-cut machine.  Start with about 20 of each size.  Peel off the release paper of one star and adhere to one bin.  Repeat; randomly placing the stars until you are happy with the way the bins look.  

5.  Cut 6 vinyl  rectangles at 2" x 2-1/2" using the paper trimmer.  Round off the corners with the scissors.  Remove the release paper from one rectangle, position and adhere to one of the indention's on the top of a bin.  Smooth out all of the air bubbles.  If you get a stubborn air bubble; use a pin to release any trapped air.  Smooth.  Repeat and finish the other indentations.  Below is a photo of how they should look when you are finished.

Below are a couple more photos of how my caddy looks now.  I love it and I am looking forward to finishing my snowman ornaments.  I will be adding some hangers and embellishments to make them look cozy and ready for the tree.

Thank you for stopping by the blog today.  I hope you got some inspiration here today and have a wonderful Christmas season!

Cheers!

Marilyn

Decorate a Christmas serving plate and candle holder with Tape Technologies

Need some quick and easy ideas for the Holidays?  With the help of Tape Technologies vinyl I have created some Christmas decor that I am proud to show off!  Read on and I will tell you how I did it!

I purchased an inexpensive ivy bowl and picked up the platter at a second-hand store.  

You will also need:

Tape Technologies vinyl:  Red and Green Polished Metal (Styletechcraft)

9" square opalescent plate with hobnail type trim  (or other similar find!)

Ivy bowl

Tea light'

Paper Trimmer

Die Cut machine

Instructions:

Clean and dry the glass thoroughly.

Cut 1/2" strips from the red vinyl with the paper trimmer.  Cut 1/2" increments from the 1/2" x 12" strip.  Set the 1/2" squares aside.

Remove the release paper from the back of one square.  Center and adhere to one corner of the platter. Repeat on the opposite side. Adhere a square next to the first square and repeat on each side; working towards the middle.  Repeat for the other 3 sides.

The plate should look like the photo below when you are finished.

Cut out holly leaves and berries using the die-cut machine.  If you don't have a die-cut machine, trace the pattern on the wrong side of the vinyl (on the release paper) and cut out. Remove the release paper, arrange and adhere the vinyl to the surface removing any air bubbles.  Place the tea light in the ivy bowl to finish.  You can further embellish the ivy bowl with a pretty bow around the neck if you like!

Thank you for stopping by the blog today.  Feel free to leave any questions or comments in the comment box below.  I like hearing from you!

Make sure to enjoy the small blessings along the way and,

Live Life with a Flourish!

Marilyn

*Note: You can find the Tape Technologies vinyl on Amazon under the name Styletechcrafts.

Enjoy!

I receive complimentary product

in exchange for my creativity on this blog.